Small push-pull solenoid – Zero Ohm Electronics
Small Push-Pull Solenoid Actuators

Small push-pull solenoid

  • Dhs. 57.75

The price is VAT inclusive

Only 8 left!

DESCRIPTION

Solenoids are made of a big coil of copper wire with an armature in the middle, basically electromagnets.
This has nice mounting tabs, its a great all-purpose solenoid.

The solenoid is able to pull or push This solenoid in particular is fairly small, with a 30mm long body and a 'captive' armature with a return spring. This means that when activated with up to 24VDC, the solenoid moves and then the voltage is removed it springs back to the original position.

To drive a solenoid you will a power transistor and a diode, check the diagram below for how to wire it to an Arduino.

A fairly good power supply to drive a solenoid, as a lot of current will rush into the solenoid to charge up the electro-magnet, about 100mA, so don't try to power it with a 9V battery!

TECHNICAL DETAILS

  • 24 DC operation (you can use 9-24 DC volts, but lower voltage results in weaker/slower operation)
  • Push or pull type with 5.5 mm throw
  • DC coil resistance: 100 ohms
  • 5 Newton starting force (24VDC)
  • 1.4 oz / 39 grams

We Also Recommend


Liquid error: Could not find asset snippets/bold-currency-converter.liquid