12V Solenoid Valve - 3/4"
Control the flow of a liquid using your computer or microcontroller using the 12V solenoid controlled fluid valve.
By simply connect a fluid source to the ¾" threaded inlet, it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.
This means that you will need enough water pressure to fully open the valve.
It operates at a minimum of around 3 PSI, allowing around 3 L/min of flow.
Although the datasheet shows the valve working at 220 VAC, it's actually 12 VDC. Our 350 GPH pump does not have enough pressure for this valve.
A garden hose or other pressurized system should work just fine.
- Datasheet (AQT15SP)